Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2023-09-09 20:33
233
Company Profile
Shandong Hanchen Metal Co.,LtdBy certification [File Integrity]
Contact:hanchenjinshu(Mr.)
Email:
Telephone:
Phone:
Area:Beijing
Address:Beijing
Website:http://www.hanchenmetal.com/ http://hanchenjinshu.amfp-inc.com/
Single Color PVDF Coated Aluminum Alloy Coil Common specifications: thickness 0.5-1.2mm, width: 800mm-1650mm
Many users of color steel products are facing such problems:
1. The color becomes old: If your color steel panel does not use high weather-resistant paint, the color of the paint will gradually fade after a long period of wind and sun exposure, especially for brighter colors.
2. Rust on the surface: the substrate of color steel plate is iron plate. We know that iron plate is extremely easy to rust. After a long time of oxidation, the rust on the surface will give you a very headache. Rust on the surface will cause the paint surface to peel off, further affecting the appearance. In the end, there is no choice but to remove rust and repaint, which will cause secondary consumption and affect production and use.
3. The salvage value of recycling is low. If it is planned to be demolished, the price of the used color steel plate is extremely low. Because of the paint surface, its price is even lower than that of ordinary scrap iron.
Single color PVDF coated Aluminum alloy coil is a cost-effective roofing and exterior wall material, which has the advantages of corrosion resistance, beautiful appearance, light weight, high strength, and easy processing and molding.
Color PVDF Coated Aluminum Coil come in a wide range of colors, textures, and finishes, which can be applied in many fields. It is lightweight, attractive,corrosion resistance,long-time performance. Color Coated Aluminum Coils and Sheets are the most economical choice for various industrial projects.
It is impossible to realize a variety of shapes. The hardness of color steel is relatively high, and it can go straight. If it is bent or designed in other shapes, it will be difficult to realize, and even if it is barely realized, the aesthetics will not be very good.
Now let us introduce PVDF coated AL alloy coil, a perfect substitute for color steel plate, which has many advantages as follows
1. Light weight: the density of aluminum is 2.73KG/M³, only 1/3 of that of steel;
2. High strength: high strength can be achieved through composition configuration, processing and heat treatment methods;
3. Corrosion resistance: with self-rust prevention ability, the formation of oxide layer, can prevent metal oxidation corrosion, good acid and alkali resistance;
4. Diverse surface treatment, beautiful: anodizing, electrophoresis, chemical treatment, polishing, painting treatment;
5. Good plasticity and easy processing;
6. Good electrical conductivity: non-magnetization and low spark sensitivity, can prevent electromagnetic interference and reduce the flammability in special environment;
7. Easy installation: aluminum metal can be riveted, welded, glued and other ways to connect;
8. Single Color PVDF Coated AL Alloy Coil Environmental protection: 100% recyclable.
PVDF is fluorocarbon paint which is a high-performance two-component coating with excellent physical and chemical properties. Fluorocarbon paint has the advantages of weather resistance, self-cleaning, corrosion resistance, solvent resistance, color retention and gloss retention, etc. The paint film has various colors , including solid paint and metallic flash paint. The fluorocarbon paints we use are all high-quality paints higher than 70% fluorocarbon.
Single Color PVDF Coated Aluminum Alloy Coil technial data | ||||||||
Grade | Annealing Tem. | Thickness/mm | Tensile test results at room temperature | bending radius | ||||
Tensile strength (Rm/MPa) | non-proportional extension tensile strength (Rp0.2/MPa) | elongation after break (m/%) | ||||||
A50mm | A | 90° | 180° | |||||
not less than | ||||||||
3003 | H14 | >0.20~0.50 | 145~195 | 125 | 2 | _ | 0.5t | 2.0t |
>0.50~1.50 | 2 | 1.0t | 2.0t | |||||
>1.50~3.00 | 3 | 1.0t | 2.0t | |||||
>3.00~6.00 | 4 | 2.0t | 一 | |||||
3004 | H14 | >0.20~0.50 | 220~265 | 180 | 1 | _ | 0.5t | 2.5t |
>0.50~1.50 | 2 | 1.0t | 2.5t | |||||
>1.50~3.00 | 2 | 1.5t | 2.5t | |||||
>3.00~6.00 | 3 | 2.0t | 一 | |||||
H24 H34 | >0.20~0.50 | 220~265 | 170 | 3 | _ | 0.5t | 2.0t | |
>0.50~1.50 | 4 | 1.0t | 2.0t | |||||
>1.50~3.00 | 4 | 1.5t | 2.0t | |||||
H16 | >0.20~0.50 | 240~285 | 200 | 1 | _ | 1.0t | 3.5t | |
>0.50~1.50 | 1 | 1.5t | 3.5t | |||||
>1.50~3.00 | 2 | 2.5t | 一 | |||||
H26 H36 | >0.20~0.50 | 240~285 | 190 | 3 | _ | 1.0t | 3.0t | |
>0.50~1.50 | 3 | 1.5t | 3.0t | |||||
>1.50~3.00 | 3 | 1.5t | 一 |
Â
Single Color PVDF Coated Aluminum Alloy Coil sheet | |
Single Color PVDF Coated AL Alloy Coil Parameter | |
Painting coating | Top:20μm Back:5μm |
Color | According to customer request |
Glossiness | Standard: 25+1-5 |
Cross-cut adhesion | The paint film does not fall off |
T-bend test | 1T- the paint film does not fall off |
Reverse impact | 9J -the paint film does not fall off |
MEK test | Butanone MEK wiped back and forth 100 times without damage to the paint film |
Heat and humidity resistance | Placed in the non-condensing damp heat test chamber for 1000 hours, no bubbles, cracks, peeling off of the paint film, no change in color, gloss and hardness |
Acid and alkali resistance | Soaked in 5% hydrochloric acid for 24 hours, no obvious change in appearance Soaked in 5% sodium oxide for 24 hours, no obvious change in appearance |
Neutral salt spray resistance | Neutral salt spray test for 1000 hours |
UV lamp accelerated aging test | OUVA-340 UV lamp test box 2000 hours of light, no bubbles, cracks and other defects. |
Â
Â
Â
workshop
workshop
workshop
workshop
http://www.hanchenmetal.com/